Our own guides to hand dryers and other restroom equipment.

Information on hand dryers and commercial restroom accessories

Grab Bars

Restroom Direct offers a complete line of surface mount stainless steel grab bars and safety rails including options for concealed or exposed mounting, snap flange, and a variety of horizontal, vertical, and swing away configurations.

As usual, our offerings are always growing, so, if you don't see what you need, please call us! There's always a good chance we've just added what you are looking for to our product line!

And we are now offering CUSTOM grab bars. Call for quote! (704) 937-2673

FAQ

At what height should grab bars be placed to be ADA compliant?

Here is the relevant section of the ADA guidelines:

609.4 Position of Grab Bars. Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except that at water closets for children's use complying with 604.9, grab bars shall be installed in a horizontal position 18 inches (455 mm) minimum and 27 inches (685 mm) maximum above the finish floor measured to the top of the gripping surface. The height of the lower grab bar on the back wall of a bathtub shall comply with 607.4.1.1 or 607.4.2.1

For more information see chapter 6 of the United States Access Board Website.

Note: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended. To avoid potential injury, the building owner or maintenance personnel should remove the grab bar from service if the grab bar is not adequately secured to wall or if there is any observed damage to the welds.

Grab Bars

ASI

Bobrick

Bradley

Ponte Giulio