• Home
  • ASI 10-0185 Profile, Steel Cover, Surface Mount Hand Dryer, White, Automatic, Universal Voltage

ASI 10-0185 Profile, Steel Cover, Surface Mount Hand Dryer, White, Automatic, Universal Voltage

(0) No Reviews yet
$442.54
SKU: 10-0185

IN STOCK

7 available for immediate shipment

This durable slim profile hand dryer is ADA compliant (when surface mounted) and has a sleek modern cover design.

  • Durable construction (16 gauge steel).
  • Quiet operation (63dB)
  • 10 Year manufacturer's limited warranty
  • ADA Compliant without need for recessing (surface mount)
  • Universal voltage support (works with 110-120V, 208V or 220-240V)


Certifications:

     

Measurement Diagram:


Alternatives:

Looking for a similar format dryer from the renowned Dyson Airblade family? See the compact but powerful Dyson "V" (HU02) hand dryer.





Activation: Automatic (infra-red) hands-free (self calibrating)   
Mount: Wall Mount / Surface Mount   
Cover: 16 Gauge drawn steel   
Cycle Time: Not applicable Dryer stops when hands are removed.   
Nozzle: Fixed directional outlet grill   
Power: 2022 Watts, 110-120V (17.6A), 50/60Hz   
Motor: Brush type, dual ball bearings   
Fan: Single Inlet Centrifugal   
Airspeed: 186 CFM   
Heating Element: 1857W Nichrome wire with auto reset circuit breaker   
Filter: None   
IP Rating: Not published   
Product Dimensions: 14-1/2" Wide x 10-3/4" Tall x 4" Deep   
Shipping Dimensions: 16-3/4" Length x 12-3/4" Width x 8" Height   
Shipping Weight: 12.7 lbs.   
UPC / GTIN: Not Published   
Manufacturer Model No.: 10-0185   
Country of Manufacture: Taiwan   
Warranty: 5 Year Manufacturer Limited Warranty   
Additional Comments: Taiwan   

Architectural Specifications:

Surface Mounted Sensor Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, 16 gauge (.063", {1.6}) thick drawn steel or type 304 stainless steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel on steel or bright or satin finish on stainless steel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten (10) years. Owner’s Manual (OM) and Mounting Template are supplied with each unit.


Ratings & Reviews

No reviews available

Be the first to Write a Review