ASI Profile 10-9457 Stainless Steel Recessed Paper Towel Dispenser
Dispenses 350 C-fold or 475 multi-fold paper towels. Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly. Door held closed with a rimless tumbler lock.
| Type: | C-Fold / Multi-Fold Paper Towel Dispenser |
| Primary Material: | Stainless Steel |
| Color / Finish: | Satin (Brushed) |
| Installation Type: | Wall / Recessed |
| Capacity: | 350 C-Fold or 475 Multi-Fold Paper Towels |
| Power: | No power required |
| ADA Compliant: | Yes |
| Overall Dimensions: | 12-3/4" Wide x 17-1/4" Tall x 4-15/16" Deep (Projects 15/16" out from wall) |
| Rough-In: | 11-1/4" Wide x 15-3/4" Tall x 4-1/4" Deep |
| Shipping Dimensions: | 21" Length x 16" Width x 6" Height |
| Shipping Weight: | 12.2 lbs. |
| Manufacturer Model No.: | 10-9457 |
| UPC / GTIN: | Not published |
| Country of Manufacture: | Not published Buy American Act compliant |
| Warranty: | Warranted to be free from defects in material and workmanship for a period of one (1) year from date of invoice. |
| Additional Comments: | Tumbler lock uses ASI key: E-114. |
Architectural Specifications:
Profile Collection Recessed Paper Towel Dispenser shall hold and dispense 475 standard multi-fold or 350 standard C-fold paper towels. Cabinet and door shall be fabricated of alloy 18-8 stainless steel, type 304. Cabinet shall be 20 gauge (.9mm), with a 1′′ (25mm) wide perimeter return to lay flat against wall. Full face door shall be 16 gauge (1.5mm) and shall be free of miters, welding or open seams with 15/16′′ (24mm) square horizontal returns to wall and 3/4′′ rounded vertical edges. Door shall be attached to the edge of unit with a full length 3/16′′ (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with a rimless tumbler lock keyed alike to other ASI washroom equipment. Towel dispensing slot shall have a fully deburred edge for snag-free dispensing and user safety. Structural assembly of body and door components shall be of welded construction. All exposed surfaces shall have No 4 satin finish.