ASI 10-7313 Soap Dish w/Glass Holder, Surface Mounted
ASI 10-7313 Surface mounted soap dish is fabricated of type 304 stainless steel alloy 18-8. Soap dish is one piece molded clear glass and has integral ribs. To install, secure wall plate to wall with screws (included) at holes provided. Slip notched section of unit over top lip of wall plate. Tighten concealed set screw to lock unit in place. Unit is 4-15/16" W x 4-7/8" D.
| Overall Dimensions:: | 4-7/8" Wide x 2" Tall x 4-7/8" Depth |
| Shipping Weight: | 0.85 lbs |
| Manufacturer Model No.: | 10-7313 |
Architectural Specifications:
Omara Collection Soap Dish Holder shall be type 304 stainless steel alloy 18-8. Soap dish shall be one piece molded clear glass and shall have integral ribs. Wall flange shall lock to wall bracket with stainless steel M5 hex socket set screw concealed on bottom perimeter of flange. Post shall be 22 gauge tubing with formed 18 gauge threaded bracket welded inside end. Soap dish support ring shall be formed from one piece of 16 gauge and shall be welded to post end. Flange shall be 1/16" (1.5) thick with 3/32" (2.3) thick sides and heavy reinforcement ribs. Post shall be bolted to flange with concealed and locked M6 (Ø1/4") screw. All exposed surfaces shall have satin finish. Wall bracket shall be 18 gauge with embossed ribs for added strength and shall have two (2) mounting slots to accommodate M4 pan head screws (provided) and allow slight installation alignment adjustment. Hex L-key (M2.5) is provided to lock set screw to secure unit to wall bracket.