ASI Heavy Duty Robe Hook, Model 0751-A

American Specialties - Bathroom Accessories - 0719-A Heavy Duty Robe Hook

Note: if you are ordering more than 2 or 3, please call for better shipping rates.

With a lusterous chrome finish, this heavy duty robe hook is very attractive, but don't let it's good looks fool you. If properly attached (see spec sheet) it is rated to hold up to 300lbs! Also available in a concealed mount version for a bit cleaner presentation.




Specifications

Construction	Fabricated of brass with a chrome finish.
Mount	Surface mount with exposed counter-sunk mounting holes.
Dimensions	2-3/4" Width x 2-3/4" Height x 3-1/4" Depth.
UPC/ISBN	Not Available
Shipping Weight	1 lb

Alternatives

Need a double hook?

Try the ASI 0745-Z Double Robe Hook

Downloadable Resources

ASI 0751-A Robe Hook Technical Data

Additional Information

ARCHITECTURAL SPECIFICATION

Surface Mounted Heavy-Duty Robe Hook shall be fabricated of brass with a chrome finish. Three (3) 7/32" diameter (Ø5.6) countersunk holes shall be provided for anchoring hook to wall on 2-3/4" diameter (Ø70) flange. Hook shall be capable of supporting over 300 lbs. (136.1 kg) when property attached to building element.

INSTALLATION

Unit is surface mounted on wall or partition using stainless steel Philips flat or oval head No 10 self tapping screws (provided by others to suit wall conditions) in a manner capable of supporting 300 lbs (136.1 kg). Ensure that mounting configuration complies with local building codes. For compliance with ADA Accessibility Guidelines install the hook center-line 54" (1372) maximum above the finished floor (MAX AFF) when clear floor side reach access is provided or 48" (1219) MAX AFF with clear floor forward reach access only provided.