ASI 0714 Coat and Bumper Hook

American Specialties - Bathroom Accessories - 0714 Coat Hook & Bumper

Note: if you are ordering more than 2 or 3, please call for better shipping rates.

Fabricated from chrome plated brass, 3″ (76 mm). Neoprene bumper protects agaainst damage when door is opened.




Specifications

Construction	Fabricated of brass with a chrome finish.
Mount	Surface mount.
Dimensions	1-3/8" Width x 2-1/2" Height x 3" Depth.
UPC/ISBN	Not Available
Shipping Weight	1 lb

Alternatives

Need a double hook?

Try the ASI 0745-Z Double Robe Hook

Downloadable Resources

ASI 0714 Robe Hook Technical Data

Additional Information

ARCHITECTURAL SPECIFICATION

Surface Mounted Heavy-Duty Robe Hook shall be fabricated of brass with a chrome finish. Three (3) 1/4-28 cone point stainless steel hex socket set screws shall be provided evenly spaced around perimeter of flange for securing to wall bracket. Hook shall be capable of supporting over 300 lbs (136.1 kg) when properly attached to building element.

INSTALLATION

Wall bracket is surface mounted using No 10 pan head self-tapping screws (provided by others to suit wall conditions) in a manner capable of supporting 300 lbs (136.1 kg) of downward force. Ensure that mounting configuration complies with local building codes. Secure hook to bracket by tightening three (3) hex socket set screws on perimeter of flange with a 1/8" hex wrench. For compliance with ADA Accessibility Guidelines install the hook center-line 54" (1372) maximum above the finished floor (MAX AFF) when clear floor side reach access is provided or 48" (1219) MAX AFF with clear floor forward reach access only provided.