ASI 0390 Automatic Deck Mounted Soap Dispenser (AC Powered)

American Specialties  |  EZFill System  |  0390-1AC |  Dispenser only  |  Plug-In version

Part of ASIs new top-fill, multi-feed soap dispensing system, this counter top automatic liquid soap dispenser can be configured to be used with up to 5 additional units pulling from a single common reservoir which is easily filled from a deck mount port and can be adjusted using a remote control.  Plugs in to standard 120V AC outlet.

NOTE: This product includes one dispenser, deck mount hardware, in-line pump, and AC adapter.
              Reservoir and Remote Control are purchased separately.

IMPORTANT: To use this system, you will also need to purchase a 0390 EZFill Multifeed Tank and 0390-BR Tank Mounting Bracket.  One tank will service up to 6 dispensers.

OPTIONALLY, you may purchase a 0390-R Remote Control which allows: adjustment of soap dispense volume, continuous activation of the pump to prime the dispenser, disabling of the pump (during cleaning, etc). One remote will work with multiple dispensers.


NOTE: Water faucet shown in above example, but not included.


Benefits of EZFill Soap Dispensing System

	Holds 169 oz. (5 L) of liquid soap to supply up to six (6) individual EZ Fill™ vanity mounted automatic soap dispenser units. With ADD ON TANK 0390 (Purchased Separately)
	Controls all dispensers with one remote, allowing flexibility in settings with a choice of 4 presets. With OPTIONAL REMOTE (Purchased Separately)
	Using a single soap reservoir, this top-fill system allows refill of up to 6 soap dispensers with 1 pour — for easy ongoing maintenance. With ADD ON TANK 0390 (Purchased Separately)
	Using infrared sensors, each of up to 6 automatic soap dispensers is fed by its own controllable peristaltic pump. With OPTIONAL REMOTE (Purchased Separately)

Specifications

Alternatives

Need a battery operated unit?

Try the ASI 0390-1A Soap Dispenser

Downloadable Resources

ASI 0390-1AC Liquid Soap Dispenser Technical Data

ASI 0390-1AC Operating Manual

Additional Information

ARCHITECTURAL SPECIFICATION

EZFill™ Vanity Mounted Automatic Soap Dispensing System Soap Dispenser shall dispense liquid soap within the viscosity range of 100 – 3800 cP (MPa•s) in stream cycles with volumes of approximately 0.007 oz (0.2 ml) to 0.08 oz (2.3 ml) in four (4) steps programmable by owner with remote control programming unit (optional; supplied one (1) per six (6) pack) with factory preset at approximately 0.03 oz (0.8 ml). Operation is initiated by hands-free sensor controlled by microprocessor digital circuitry and peristaltic pump is powered by six (6) D size 1.5 V batteries (supplied by others) in a screw-locked IP67 rated compartment (provided) located under counter or an AC Adapter (also IP67 rated, provided, select model) plugged into GFCI outlet (by others). Unit shall have chrome plated spout and sensor housing with a highly polished finish over all exposed surfaces. Unit shall have LED in sensor to indicate function a nd battery condition. A self adhesive label shall be provided for use at owner’s option to indicate dispenser function. Unit shall mou nt on vanity deck up to 2" (51) thick through 1" (Ø25) diameter hole minimum to 1-1/4" (Ø32) max. Soap supply shall be from EZFill™ Vanity Mounted Top-Fill Port and Multi-Feed Tank (supplied separately) with capacity of 169 oz (5 L) of liquid soap containing no abrasives or particulates. Up to six (6) individual EZFill™ vanity mounted automatic soap dispenser units shall draw from each Multi-Feed tank located under counter through connection to under-counter soap distribution tubing (provided). Owner’s Manual and Installation Guide (OM & IG) shall be provided with unit in carton.

OPERATION

System shall operate each time an object is positioned within the sensing range of 1-3/16" to 3-15/16" ± 3/8" (30 to 100 ± 10) directly in front of the spout of the dispenser. A stream of appropriate viscosity non-abrasive liquid soap drops with total dispense amount of 0.03 oz (0.8 ml) will be pumped from the nozzle during each activation. Optional remote control unit Model № 0390-R (supplied {one (1) per six (6) pack} or order separately) will allow owner programming of alternate dispense amounts. See Model № 0390-R TDS and Owner’s Manual for complete description of functions. Unit will dispense soap while batteries are at suitable charge level (or AC adapter is connected) and correct viscosity soap is present in the tank and system is correctly maintained to enable dispensing (red LED is not flashing continuously or does not remain dark when trigger attempt is made). LED will display red flash for sensing and continuous fl ashing for low battery condition. Push-button releases soap for easy soap priming. System shall allow filling soap from top of vanity without requiring removal of bottles under vanity. Up to six (6) individual dispensers will draw soap as required to operate until supply is depleted. Unused transfer ports are blocked with solid plugs (provided) to prevent overflow, contamination and evaporation. Soap is ma nually replenished and batteries are replaced on service interval determined by maintenance schedule. See OM & IG for complete description of Features and Operations.