| | |
|
| |
| | |
|
Our own guides to hand dryers and other restroom equipment.
Information on hand dryers and commercial restroom accessories |
|
XLERATOR® XL-SP (Black) Hand Dryers
|
Retail Price: $820.00
OUR PRICE: $600.00
Product Options
Electrical Specifications: |
|
|

XLERATOR® Special Color Black Hand Dryers by Excel Dryer Inc.
Please note the high voltage XL-SPV-Black typically ships in 5-7 business days.
The Black cover option is a very attractive option for the XLERATOR® hand dryer.
Note: 208V Version is Single Phase.
To see the other cover options, please see our main page for XLERATOR® hand dryers.
|
|
•
|
Dries Hands Completely in 10 to 15 Seconds
|
•
|
Uses 80% Less Energy
|
•
|
95% Cost Savings vs. Paper Towels
|
•
|
GREENSPEC® Approved and Helps Qualify for LEED® credits.
|
•
|
Source Reduction Alternative
|
•
|
Promotes Hygiene
|
|
|
|
|
|
Dimensions:
11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP)
Weight:16 LBS. (7.3 KGS.)
|
|
|
-
Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.
-
Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.
-
All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
-
Entire mechanism shall be internally grounded.
|
|
-
Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).
-
Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).
-
Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.
|
|
The hand dryer shall be guaranteed to be free from defects for a period of seven (7) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.
|
Downloads: XLERATOR® three-part spec sheet: 
More information from Excel Dryer here: 
XLERATOR® warranty policy:  
|
OUR PRICE: From $500.00 to $980.00
The XLERATOR® hand dryer by Excel Dryer, Inc. is the original & premier high speed hand dryer.
|
|
OUR PRICE: From $276.00 to $519.00
Brushed stainless steel recessing kit for replacing a traditional paper towel dispenser with an Excel XLERATOR® hand dryer.
|
OUR PRICE: From $22.50 to $180.00
Certified XLERATOR® HEPA Filtration Retro-fit kit, HEPA Filter, Metal Mesh pre-filter.
|
Retail Price: $50.00
OUR PRICE: $42.00
Excel Xlerator
Motor SPEED Control.
(Retro-fit kit.)
|
Air Outlet Assembly (Nozzle) Excel Xlerator Series Hand Dryers. Includes gasket. Regular or noise reduction.
|
OUR PRICE: From $135.00 to $240.00
Universal wall guard for
hand dryers. Comes in black,
white, or stainless steel.
| | |
|
|