Chat with us, powered by LiveChat
Browse Categories
Browse by Manufacturer

Better Business Bureau Accredited Logo
  PayPal Acceptance Mark

ASI 8208 L-Shaped Stainless Steel Folding Shower Seat

Heavy Duty, stainless steel folding shower seat.
Retail Price: $1,251.76
OUR PRICE: $688.47

Product Options

free shipping

  American Specialties, Inc.     

ASI Model 10-8208 Stainless Steel Folding Shower Seat (L-Shaped)

Seat measures 33" Wide by 23" Deep. Folds up to wall for convenient out of the way storage.
Available in LEFT-HAND (10-8208-L) or RIGHT-HAND (10-8208-R) configuration.


Seat Material

Stainless Steel Slats

Frame Material

304 Satin finish, stainless steel.


Fold-up bracket.

Load Capacity

Rated up to 500 lbs when properly installed.

Height Open

17" to 19"

Height Closed

35" to 37"

    If you would like a similar seat, but phenolic, take a look at the 8206 Folding Shower Seat.

Architectural Specifications


Fold-up Shower Stall Seat shall be made of 1" (25mm) dia. and 1-1/4" (32mm) square x 18 gauge (1.3mm) tubing with 3/16"(4.8mm) thick mounting flanges and 16 gauge (1.5mm) guide bracket/arm support. Seat slats shall be 1" x 3" (25mm x 76mm) x 18 gauge rectangular tubing with welded closed ends. All shall be fabricated of seamless type 304, 18-8 alloy stainless steel. All exposed surfaces shall have a No 4 satin finish. Structural assembly shall be of welded construction. All exposed edges and cornersshall be radiused and/or deburred. Support arm shall fold up when in retracted position to provide low profile against wall. No extra fittings shall be required to retain seat in storage position. Guide bracket shall control seat lowering into operating position. Unitshall satisfy ADA Accessibility Guidelines when mounted properly.Fold-up Shower Stall Seat shall be Model No 8208-_____(R for right hand or L for left hand) as manufactured by AmericanSpecialties, Inc., 441 Saw Mill River Road, Yonkers, NY 10701-4913


This unit is surface mounted. Installer/construction contractor must provide concealed anchor plate or blocking as specified inconstruction documents or as required by local building codes prior to wall finishing. Fasten unit flanges and guide bracket toconcealed anchor or blocking plate with appropriate hardware. See “STRENGTH” section below. Note that concealed mountingplates or anchors and hardware are not supplied with this product and must be specified separately. Ensure that mounting configurationcomplies with local building codes.


ASI Shower Seats are designed to meet and exceed ADAAG requirements as published in CABO/ANSI A117.1-2003 section 610and CFR 28 Part 36, Federal Register Vol. 56, No 144 July 26, 1991, section 4.21.3 and section 4.26.3 that fabricated product shallbe of adequate strength to support a load of 250 pounds (113.4 kg) and unit shall conform to size and edge clearances as diagrammed.Mounting to the wall is a critical part of the system to meet this requirement. To withstand the shear, tension or pullout and torsionloads generated by the maximum loading, the fastener system must be adequately sized. Unit is load rated to support a weight of 500 lbs at front edge when properly installed and has been tested to successfully hold a weight in excess of 1000 lbs.


Tube: 18 gauge (.048 in. <1.22mm> thick) type 304 stainless steel, 1" (25mm) dia. and 1-1/4" (32mm) square. Unitized all welded construction. Exposed surfaces are satin finish. Edges and corners are radiused and burr free.

Flange: 3/16" (4.8mm) type 304, stainless steel. Exposed surfaces have satin finish. Edges and corners are radiused and burr free.

Bracket: 16 gauge (.06 in. <1.52mm> thick) type 304, stainless steel. Exposed surfaces are satin finish. Edges and corners are radiused and burr free.

Slats: 18 gauge (.048 in. <1.22mm> thick) type 304, stainless steel. Exposed surfaces shall have satin finish. Edges and corners are radiused and burr free.

Spring: Stainless steel wire, type 304, 1" (25 mm) body dia. x 3" (76mm) body length x .075" (1.91mm) wire diameter.


Fold-up Shower Seat requires only one hand operation to manually lower to horizontal position for use or raise for departureand arrival. Guide bracket with spring detent prevents seat from dropping and provides positive support in usage position aswell as spring locked storage position.

Downloadable Resources