ASI Model 10-8206 Folding Shower Seat (L-Shaped)
Seat measures 33" Wide by 23" Deep. Folds up to wall for convenient out of the way storage.
Available in LEFT-HAND (10-8206-L) or RIGHT-HAND (10-8206-R) configuration.
Specifications
|
Seat Material
|
Solid Ivory Phenolic
|
|
Frame Material
|
304 Satin finish, stainless steel.
|
|
Activation
|
Fold-up bracket.
|
|
Load Capacity
|
Rated up to 500 lbs when properly installed.
|
|
Height Open
|
17" to 19"
|
|
Height Closed
|
35" to 37"
|
If you would like a similar seat, but phenolic, take a look at the 8206 Folding Shower Seat.
Architectural Specifications
SPECIFICATION
“L-shaped” Phenolic Fold-up Shower Stall Seat shall have all metal parts fabricated of 18-8 alloy type 304stainless steel. Seat frame and support legs shall be 1" diameter (Ø25) and 1-1/4" (32) square x 18 gauge (1.2)with 3/16" (4.8) thick mounting flanges and 16 gauge (1.5) guide bracket/arm support. All exposed surfaces shallhave No 4 satin finish. Structural assembly shall be of welded construction and all exposed edges and corners shallbe radiused and/or deburred. Seat shall be solid phenolic with ivory color top and bottom surfaces and shall haveblack edges. Support arm shall fold up when in retracted position to provide low profile against wall. No extrafittings shall be required to retain seat in storage position. Guide bracket shall control seat lowering into operatingposition. Unit shall satisfy ADA Accessibility Guidelines when mounted properly.“L-shaped” Phenolic Fold-up Shower Stall Seat shall be Model No 8206 -___(R for right hand or L for lefthand) as manufactured by American Specialties, Inc., 441 Saw Mill River Road, Yonkers, New York10701- 49133.
INSTALLATION
This unit is surface mounted. Installer/construction contractor must provide concealed anchor plate or blocking as specified in construction documents or as required by local building codes prior to wall finishing. Fasten unitflanges and guide bracket to concealed anchor or blocking plate with appropriate hardware. See “STRENGTH”section below. Note that concealed mounting plates or anchors and hardware are not supplied with this productand must be specified separately. Ensure that mounting configuration complies with local building codes. Unit isreversible in the field for right or left hand installation.
STRENGTH
ASI Shower Seats are designed to meet and exceed ADAAG requirements as published in ICC/ANSI A117.1-2003 section 610 and CFR 28 Part 36, Federal Register Vol. 56 No 144, 26 July 1991, section 4.21.3 and section4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4 kg) and unitshall conform to size and edge clearances as diagrammed. Mounting to the wall is a critical part of the system tomeet this requirement. To withstand the shear, tension or pullout, and torsion loads generated by the maximumloading, the fastener system must be adequately sized. Unit is load rated to support a weight of 500 lbs at frontedge when properly installed and has been tested to successfully hold a weight in excess of 1000 lbs.
MATERIALS
Tube: 18 gauge (.048" <1.22> thick), type 304 stainless steel 1" diameter (Ø25) and 1-1/4" (32) square.Unitized all welded construction. Exposed surfaces have satin finish. Edges and corners are radiusedand burr free. Frame is field reversible for either left or right hand..
Flange: 3/16 " (4.8), type 304 stainless steel. Exposed surfaces have satin finish. Edges are radiused and burr free..
Bracket: 16 gauge (.06 in. <1.52mm> thick) type 304, stainless steel. Exposed surfaces are satin finish. Edges and corners are radiused and burr free.
Seat: Solid Phenolic (“L” shape) 1/2" x 33" x 21-1/2" (13 x 838 x 546) nonporous seat has ivory colored topand bottom surfaces with semi-gloss finish and black edges with radiused and burr free corners. Seattop shall be field reversible for left or right hand. Seat top shall have slots for water drainage and user slipresistance. Mounting hardware is smooth stainless steel dome head carriage bolts with acorn nuts on bottom..
Spring: Stainless steel wire, type 304, 55/64" body diameter (Ø21,5) x 2-1/4" body length (57,2) x .085"diameter (Ø2,2).
OPERATION
Fold-up Shower Seat requires only one hand operation to manually lower to horizontal position for use or raise fordeparture and arrival. Guide bracket with spring detent prevents seat from dropping and provides positive supportin usage position as well as spring locked storage position.
Downloadable Resources