Live Chat Software
Browse Categories
Browse by Manufacturer

Better Business Bureau Accredited Logo
  PayPal Acceptance Mark

ASI 8205 Padded L-Shaped Folding Shower Seat

White NaugaHyde and stainless steel folding shower seat. Right hand version.
White NaugaHyde and stainless steel folding shower seat. Right hand version.White NaugaHyde and stainless steel folding shower seat. Left-hand version.
Retail Price: $640.10
OUR PRICE: $320.05

Product Options

free shipping

  American Specialties, Inc.     

ASI Model 10-8205 Padded, L-Shaped Folding Shower Seat

Seat measures 33" Wide by 22-7/8" Deep. Folds up to wall for convenient out of the way storage.
Available in LEFT-HAND (10-8205-L) and RIGHT HAND (10-8205-R) versions.


Seat Material

Ivory colored, padded, Naugahyde.

Frame Material

304 Satin finish, stainless steel.


Fold-up bracket.

Load Capacity

Rated up to 500 lbs when properly installed.

Height Open

17" to 19"

Height Closed

34-3/8" to 36-3/8"

    If you would like a similar seat, in a compact version, look at the 8204.

Architectural Specifications


“L- shaped” Fold-up Padded Shower Stall Seat shall have all metal parts fabricated of 18-8 stainless steel type304; seat frame and support legs shall be 1" diameter (Ø25) and 1-1/4" (32) square x 18 gauge (1.2) tubing with3/16" (4.8) thick mounting flanges and 16 gauge (1.5) guide bracket/arm support. All exposed surfaces shall haveNo 4 satin finish. Structural assembly shall be of welded construction. All exposed edges and corners shall beradiused and/or deburred. Seat shall be sponge cushion covered with off-white Naugahyde® mounted on 1/2"(13) thick marine grade plywood. Support arm shall fold up when in retracted position to provide low profileagainst wall. No extra fittings shall be required to retain seat in storage position. Guide bracket shall control seatlowering into operating position. Unit shall satisfy ADA Accessibility Guidelines when properly installed.“L-Shaped” Fold-up Padded Shower Stall Seat shall be Model No 8205-____(L for left hand or R forright hand) as manufactured by American Specialties, Inc., 441 Saw Mill River Road, Yonkers, NewYork 10701- 4913


This unit is surface mounted. Installer/contractor must provide concealed anchor plate or blocking as specified inconstruction documents or as required by local building codes prior to wall finishing. Fasten unit flanges and guidebracket to concealed anchor or blocking plate with appropriate hardware. See “STRENGTH” section below.Note that concealed mounting plates or anchors and hardware are not supplied with this product and must bespecified separately. Ensure that mounting configuration complies with local building codes.


ASI Shower Seats are designed to meet and exceed ADAAG requirements as published in ICC/ANSI A117.1-2003 section 610 and CFR 28 Part 36, Federal Register Vol. 56, No 144, July 26, 1991, section 4.21.3 andsection 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4 kg)and unit shall conform to size and edge clearances as diagrammed. Mounting to the wall is a critical part of thesystem to meet this requirement. To withstand the shear, tension or pullout, and torsion loads generated by themaximum loading, the fastener system must be adequately sized. Unit is load rated to support a weight of 500 lbsat front edge when properly installed and has been tested to successfully hold a weight in excess of 1000 lbs.


Tube:18 gauge (.048 in. <1.22> thick), type 304 stainless steel 1" diameter (Ø25) and 1-1/4" (32) square.Unitized all welded construction. Exposed surfaces have satin finish. Edges and corners are radiusedand burr free.

:3/16" (4.8 thick), type 304, stainless steel. Exposed surfaces have satin finish. Edges and corners areradiused and burr free.

: 16 gauge (.06" <1.52> thick), type 304, stainless steel. Exposed surfaces have satin finish. Edges andcorners are radiused and burr free.

: Closed cell medium density foam cushion covered with off-white Naugahyde® on a 1/2" (13) thick baseof marine grade plywood. Seat cover top edge seam is sewn internally, laid flat and re-stitched forstrength and smooth comfort. Bottom edge seam is tuck-and-roll construction. All seams aresewn using mildew-resistant Nylon® heavyweight thread. Bottom is fully covered and edges aretucked and concealed stainless steel stapled to base. Concealed mounting is from bottom withstainless steel screws into stainless steel inserts. Overall size is 33"W x 21-1/2"D (838 x 546).

: Stainless steel wire, type 304, 55/64" body diameter (Ø21,5) x 2-1/4" body length (57,2) x .085" diameter(Ø2,2).

Downloadable Resources