| | |
|
| |
| | |
|
Our own guides to hand dryers and other restroom equipment.
Information on hand dryers and commercial restroom accessories |
|
ASI 8203 Compact Folding Seat
|
Retail Price: $453.51
OUR PRICE: $249.43
Model Number: 10-8203
|
ASI Model 10-8203 Compact Folding Shower Seat Seat measures 18" Wide by 16" Deep. Folds up to wall for convenient out of the way storage. Specifications
Seat Material
|
One piece phenolic, ivory colored. Slotted for drainage.
|
Frame Material
|
304 Satin finish, stainless steel.
|
Activation
|
Fold-up bracket.
|
Load Capacity
|
Rated up to 500 lbs when properly installed.
|
Height Open
|
17" to 19"
|
Height Closed
|
28-5/8" to 30-5/8"
|
If you would like a similar seat, but wider, take a look at the 8206 Folding Shower Seat.
Architectural Specifications
SPECIFICATION
Compact Rectangular Phenolic Fold-up Shower Seat shall have all metal parts fabricated of 18-8 alloy type 304 stainless steel. Seatframe and support legs shall be 1" (25mm) dia. and 1-1/4" (32mm) square x 18 gauge (1.2mm) with 3/16" (4.8mm) thick mountingflanges and 16 gauge (1.5mm) guide bracket/arm support. All exposed surfaces shall have No 4 satin finish. Structural assemblyshall be of welded construction and all exposed edges and corners shall be radiused and/or deburred. Seat shall be 5/16" (8mm) thicksolid phenolic with ivory color top and bottom surfaces and shall have black edges. Support arm shall fold up when in retractedposition to provide low profile against wall. No extra fittings shall be required to retain seat in storage position. Guide bracket shallcontrol seat lowering into operating position. Unit shall satisfy ADA Accessibility Guidelines when mounted properly.Compact Rectangular Phenolic Fold-up Shower Seat shall be Model No 8203 as manufactured by American Specialties, Inc.,441 Saw Mill River Road, Yonkers, NY 10701-4913
INSTALLATION
This unit is surface mounted. Installer/construction contractor must provide concealed anchor plate or blocking as specified inconstruction documents or as required by local building codes prior to wall finishing. Fasten unit flanges and guide bracket toconcealed anchor or blocking plate with appropriate hardware. See “STRENGTH” section below. Note that concealed mountingplates or anchors and hardware are not supplied with this product and must be specified separately. Ensure that mounting configurationcomplies with local building codes.
STRENGTH
ASI Shower Seats are designed to meet and exceed ADAAG requirements as published in ICC/ANSI A117.1-2003 section 610 andCFR 28 Part 36, Federal Register Vol. 56, No 144 July 26, 1991, section 4.21.3 and section 4.26.3 that fabricated product shall be ofadequate strength to support a load of 250 pounds (113.4 kg) and unit shall conform to size and edge clearances as diagrammed.Mounting to the wall is a critical part of the system to meet this requirement. To withstand the shear, tension or pullout, and torsionloads generated by the maximum loading, the fastener system must be adequately sized. Unit will carry a load of 500 lbs if properlyinstalled. The supporting wall must be adequately reinforced to carry the rated load for the products lifetime.
Downloadable Resources
|
|
|