Chat with us, powered by LiveChat
Browse Categories
Browse by Manufacturer

Better Business Bureau Accredited Logo
  PayPal Acceptance Mark

ASI 04823 Recessed Mount Stainless Steel Dual Roll Toilet Tissue Dispenser with Napkin Disposal

Stainless steel toilet tissue dispenser and sanitary napkin receptacle.
Stainless steel toilet tissue dispenser and sanitary napkin receptacle.04823 Stainless steel toilet tissue dispenser - Front View.04823 Stainless steel toilet tissue dispenser - Side View.04823 Stainless steel toilet tissue dispenser - Isometric View.
Retail Price: $467.32
OUR PRICE: $257.03
Model Number: 10-04823
free shipping

American Specialties Incorporated

The ASI 04823 Stainless Steel Single Sided, Dual Roll Toilet Tissue Dispenser with Napkin Disposal 

Recess mount. Contains dual-roll toilet tissue dispenser and sanitary napkin receptacle. Sturdy 304 type, 18 gauge 18-8 alloy stainless steel construction.


    • Holds 2 rolls up to 5-1/4" diameter (1800 sheets).
    • Theft resistant spindles.
    • Cover tumbler locks to discourage vandalism.
    • Door opens to service all spindles and empty 1.3 gal. napkin disposal container.


Overall Size: 17-3/8" Wide x 20" Tall x 4-1/4" Deep

Weight: 12.6 lbs.


      For a double sided recessed mount dispenser, try the ASI 04813 Stainless Steel Toilet Tissue Dispenser.

Downloadable Resources:

      ASI 04823 Toilet Tissue Dispenser Spec Sheet

Architectural Specification:

Recessed Toilet Tissue Dispenser and Napkin Disposal Unit shall hold and dispense two rolls standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x Ø133) toilet paper. Removable waste container shall have a capacity of 1.3 gal (4.9 liters) or 300 in3 (.005 m3). Toilet paper dispenser door and waste disposal door shall be fabricated of 18 gauge type 304 stainless steel alloy 18-8. Face frame and cabinet shall be 22 gauge. All exposed surfaces shall have No 4 satin finish and be protected by PVC film easily removed after installation. Disposal door shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbol. Toilet paper dispenser/disposal door shall be attached to cabinet at side with a full-length 3/16" diameter (Ø5) stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment. Face trim shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square return to face of wall. Structural assembly of all components shall be of welded construction. Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in stainless steel endpins and two (2) rollers [p/n R-004] shall be supplied.


Mount unit in wall recess using four (4) No 10 self-tapping screws (by others) through concealed mounting holes provided. Note that top of RWO (rough wall opening) is 13/16" (21) below top of unit. For ADAAG compliance the centerline of the TP Dispenser should be located within 7" to 9" (178-227) of the front of the toilet and the TP Dispenser opening bottom should be above 15" (381) minimum AFF. An optional GB (not provided) at 33"-36" (838-914) AFF to the top of the bar should allow the service door top to clear the bottom of the bar when opening the door.


Push self-closing disposal door to deposit waste material. Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning. Waste receptacle is emptied manually on cycle determined by maintenance needs.Toilet paper rolls and waste receptacle are serviced by unlocking and opening door. Locked door prevents inadvertent dumping and unauthorized removal. Waste container safety-edged finger hole provides convenient grip for service. Toilet paper spindles are carried in vandal resistant sub-frame accessible when door is opened.