American Dryer DR Series Hand Dryers

                  Quantity discounts available

---

American Dryer DR series hand dryers.  Quiet, compact and affordable.  Low cost hand dryers.

Model	Cover / Activation	Voltage	Drying Cycle	RECESS Mount
DR10N	White Enamel on Steel, Push Button	110/120V, 15A, 1725W	40 Sec.	DR10NR
DR20N	White Enamel on Steel, Push Button	110/120V, 20A, 2300W	30 Sec.	DR20NR
DR35N	White Enamel on Steel, Push Button	208/240V, 10A, 2300W	30 Sec.	DR35NR
DR10TN	White Enamel on Steel, Automatic	110/120V, 15A, 1725W	Auto	DR10TNR
DR20TN	White Enamel on Steel, Automatic	110/120V, 20A, 2300W	Auto	DR20TNR
DR35TN	White Enamel on Steel, Automatic	208/240V, 10A, 2300W	Auto	DR35TNR
DR10NSS	Stainless Steel, Push Button	110/120V, 15A, 1725W	40 Sec.	DR10NSSR
DR20NSS	Stainless Steel, Push Button	110/120V, 20A, 2300W	30 Sec.	DR20NSSR
DR35NSS	Stainless Steel, Push Button	208/240V, 10A, 2300W	30 Sec.	DR35NSSR
DR10TNSS	Stainless Steel, Automatic	110/120V, 15A, 1725W	Auto	DR10TNSSR
DR20TNSS	Stainless Steel, Automatic	110/120V, 20A, 2300W	Auto	DR20TNSSR
DR35TNSS	Stainless Steel, Automatic	208/240V, 10A, 2300W	Auto	DR35TNSSR

To purchase recess kits for the DR series hand dryer, or to extend to an 80 second cycle for hair drying (automatic only) please see the American Dryer Accessories page.

OVERVIEW:

THE DR SERIES HAND DRYERS’ TIME-TESTED DESIGN FEATURES QUIET, DEPENDABLE OPERATION IN A HEAVY DUTY, VANDAL-RESISTANT PACKAGE.

CONSTRUCTION FEATURES:

DR SERIES COVER & FINISH – One-piece, heavy duty, 16 gauge steel with white enamel finish or optional 18 gauge type 304 stainless steel with brushed finish (SS).

TAMPER RESISTANT – Tamper resistant screws secure cover to base. Air intake vents are shielded for additional safety.

MOTOR – Permanently lubricated, maintenance free, brushless induction motor with automatic resetting thermal protector. 1/10 HP, 3200 RPM.

NOZZLE & PUSH BUTTON – Chrome plated zinc die castings. 360˚ revolving nozzle is standard. A fixed nozzle (F) is optional on all models.

DR SERIES TIMER – Push button models use a heavy duty timer for extended life. Turns on with a light touch. Turns off automatically.

AUTOMATIC SENSOR – RoHS compliant lead-free design. Microprocessor controlled infrared sensor turns dryer on when hands are under the outlet for up to 80 seconds

HEATING ELEMENT – Constructed of NiChrome resistance wire with automatic resetting thermostat. Side mounted heating element operates in the black range for maximum life.

DRYER PLACEMENT:

Dryers should be placed at least 2 feet apart and at least 12” from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18” above any projection which may interfere with the operation of the automatic sensor.

DRYER INSTALLATION:

Hand dryers require a dedicated circuit (max. 20 amp) and must be properly grounded. One side of dryer should be mounted to stud. All surface mount dryers are provided with conduit entrances for both between wall and surface wiring.

QUANTITY ESTIMATE, HAND DRYER:

Average traffic washroom..............1 dryer per 2 washbasins
Heavy traffic washroom..................1 dryer per washbasin
54” wash fountain...........................4 dryers per sink

SHIIPPING WEIGHT:DR Series 16 lbs