American Dryer A70T - SOLD OUT

OVERVIEW:

THE DR AND A SERIES HAND DRYERS’ TIME-TESTED DESIGN FEATURES QUIET, DEPENDABLE OPERATION IN A 
HEAVY DUTY, VANDAL-RESISTANT PACKAGE.

construction features:

A SERIES COVER & FINISH – One-piece, heavy duty, 1/4” thick cast iron cover with white porcelain enamel finish is the ultimate in vandal resistance.

TAMPER RESISTANT – Tamper resistant screws secure cover to base. Air intake vents are shielded for additional safety.

MOTOR – Permanently lubricated, maintenance free, brushless induction motor with automatic resetting thermal protector. 1/10 HP, 3200 RPM.

AUTOMATIC SENSOR – RoHS compliant lead-free design. Microprocessor controlled infrared sensor turns dryer on when hands are under the outlet for up to 80 seconds

HEATING ELEMENT – Constructed of NiChrome resistance wire with automatic resetting thermostat. Side mounted heating element operates in the black range for maximum life.

DRYER PLACEMENT:

Dryers should be placed at least 2 feet apart and at least 12” from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18” above any projection which may interfere with the operation of the automatic sensor.

DRYER INSTALLATION:

Hand dryers require a dedicated circuit (max. 20 amp) and must be properly grounded. One side of dryer should be mounted to stud. All surface mount dryers are provided with conduit entrances for both between wall and surface wiring.

QUANTITY ESTIMATE, HAND DRYER:

Average traffic washroom..............1 dryer per 2 washbasins
Heavy traffic washroom..................1 dryer per washbasin
54” wash fountain...........................4 dryers per sink

SHIIPPING WEIGHT:A Series 28 lbs

American Dryer A Series Specification Sheet