Nova 4 Series Hand Dryers - From $360

                                     FOR PRICE:  SELECT FROM "PRODUCT OPTIONS" MENU ABOVE

---

Cover material                   Porcelain enamel cast iron
Activation                           Automatic / hands free

Electrical Specifications
120 Volts, 15 Amps, 1800 Watts
Surface mounted        Model 0412 (previously models 0410 and 0411)
Recessed mounted    Model 0712 (previously models 0710 and 0711)

Model 0512 (previously model 0511):
Surface mount with top-knock-out:  "Institutional model" used by schools and others for retrofit jobs to allow the wiring to enter the dryer through the top.
                                     
208/240 Volts, 9 Amps, 1800 Watts
Surface mounted         Model 0422 (previously models 0420, 0421 and 0480)
Recessed mounted     Model 0722 (previously models 0720, 0721 and 0780)

Unit measurements       
Surface mounted        12.3" wide x 9.2" high x 9.5" deep
Recessed mounted    12.0" wide x 8.0" high x 5.9" deep

Weight 
Surface Mount                       27 lbs
Recessed Mount                   22 lbs

Sound level                           74 dB (quiet!)
Brushless Motor                    Brushless - 1/10 HP, 3200 RPM
Air Volume                            148  Cubic Feet per Minute (CFM)
Air Speed                              4700 Linear Feet per Minute (LFM)
Dry Time                               30 seconds
Nozzle                                   Set to the "swivel" position
Limited Warranty                  10 years, 5 years on sensor






Alternatives
For a high speed dryer with cast iron cover, use the AirMax:                 XM5-974

Not as concerned with cover durability? 
Get the auto Nova 5 automatic dryer with an aluminum cover.               Nova 5

Download the Nova 4 & Nova 5 specification sheets here  

NOVA 4 AND NOVA 5 FULL SPECIFICATIONS
Nova 4 & Nova 5 hand dryers shall be manufacturerd by or for Nova Hand Dryers to include a one-piece cover constructed of .20” thick cast iron (Nova 4® ) finished in white acid-resistant porcelain enamel or .09” thick die cast aluminum finished in brushed chrome plating or epoxy coating (Nova 5® ). Dryers shall be fitted with 360 degree revolving die cast aluminum nozzles finished in bright chrome plating. Surface-mounted covers shall be fastened by two flat- head, recessed tamper-resistant bolts to a heavy-gauge steel wall plate, which in turn shall be fastened to the wall or a wall box by four concealed mounting bolts. (For recessed dryers only: A steel wall box shall be furnished into which a complete base assembly shall be mounted). The dryer shall be equipped with 15 air intake slots (Nova 4® ) or 30 air intake slots (Nova 5® ). The fan shall be protected by an aluminum die cast grating fixed into the blower housing. The entire mechanism shall be internally grounded throughout. The motor shall be brushless, 1/10 H.P., 3200 RPM, thermally protected. The fan shall be a large single inlet centrifugal type contained in an aluminum die cast housing. It shall deliver 148 cubic feet per minute of air volume (4700 LFM) and shall be mounted directly on the motor shaft. The heating element of nichrome wire shall be mounted on the air intake. It shall be protected by an automatic resetting circuit breaker (25 AMP) which shall open whenever the air flow is cut off and shall close when the flow of air is resumed. The element shall produce an air temperature of 142 F at a 72 F ambient room temperature. The dryer shall be equipped with an infrared sensor which will allow the dryer to start automatically when hands are placed underneath the air nozzle, and to stop automatically when the hands are removed. For push button dryers (Nova 5® only), timer shall be micro-chip based and micro-switch activated. It shall be adjustable to allow for the required time cycle setting. Nova® Hand Dryers shall be listed under reexamination service of Underwriters Laboratories, Inc.